CUSTOM Iron-On Decal

Custom vinyl iron-on decal in one color up to 11.5" x 11.5"  
Additional layers available for $5 per color/layer.
 
APPLICATION INSTRUCTIONS:
1) Test hot iron on small inconspicuous area of fabric to insure the fabric can withstand the heat.
2) Preheat dry iron on high.
3) Place decal in desired positioned on fabric.
4) With light downward pressure, press one area at a time for 1-2 minutes.  Pick iron straight up and press next area.  Repeat until all areas have been pressed.
5) Allow to cool for a couple minutes and SLOWLY begin to pull clear transfer sheet off of decal.
6) If decal is not completely adhered, stop pulling, lay transfer paper back down, repeat steps 4 and 5 again.  Do this as many times as needed until decal is adhered completely and transfer paper is easily removed.
*On most fabrics, you will see the texture of the fabric in the vinyl when well applied (does not apply to gitter vinyl).
 
FABRIC IRON-ON CARE INSTRUCTIONS:
1. Wash in Cold Water
2. Avoid Fabric Softener 
3. Hang or Lay Flat to Dry
4. Do NOT dry clean
5. Do NOT iron
* Image was applied with heat. Heat will cause image to peel. *
 
Do to the nature of handmade items, some minor variations can occur and are unavoidable. I make every effort possible to make sure your item is acceptable before presenting it to you. The beauty of these handmade items is that no two are identical! Thank you for supporting my small business!